(last updated: 2006-03-23)
March 11, 2006
The unit had been stored covered, so it was very clean to start with. All I did was wipe the surface with Windex.
(date)
March 11, 2006
The unit was very dusty. With some effort it came mostly clean, though there are some spots that appear to be droplets of rusty water which will not come off. The plastic is showing definite yellowing, and there is moderate screen burn-in.
(date)
March 11, 2006
This terminal was dusty, but not stained and cleaned up very nicely. The power switch has been jammed inward, and must be replaced. This unit shows a slight amount of burn-in.
(date)
March 11, 2006
This unit's cover was loose at pickup, which was simply taped closed. During cleanup a loose hex screw for a DB connector was found inside. The power switch lever is broken off, leaving the switch in the ON position. This unit was not supplied with a keyboard.
The case cleaned up very well, but I left the long black stripe on the front under the DIGITAL badge. There does not appear to be any burn-in.
(date)
Copyright © 2006 Jared Blaser. All rights reserved.